GMH 046 Postbag HDMIController Raspberry PI Zero W and case

Adafruit Rasberry Pi Zero W

Pibow Zero Case for Raspberry Pi Zero v1.3

Raspberry Pi Zero v1.3 Camera Cable

2mm Pitch 25-Pin Female Socket Headers – Pack of 5

VSDISPLAY HDMI+VGA+2AV LCD Controller Board work for 15.4″ 17″ 1440×900 lcd panel

Samsung 32GB EVO Plus Class 10 Micro SDHC with Adapter 80mb/s (MB-MC32DA/AM)

GMH 045 Postbag ESP8266 Relay, DiceKit, PiZero W

ESP8266 5V WiFi relay module Things smart home remote control switch phone, 400m APP $4.25
Vendor: e_goto Processor store

1.Onboard Module:ESP8266 wifi module;in AP mode it can connect with 5 Clients at the same time
2.Operating Way:cellphone carried on wifi module;cellphone and wifi module carried on the same router,and use APP to control relay
3.Transmission Distance:400m (max)
4.Relay:5V,10A/250V AC 10A/30V DC
5.Baud Rate:9600,8,1,0,0
6.Features:diode effusion protection;short response time

Onboard ESP8266 11 WIFI module has three types of work: STA (client), AP (heat
Point) and STfA + AP (client + hot), according to the work of the module to select the corresponding WIFI model
Head to work mode.
Before using the need to use serial debugging software and USB to TTL module to send serial port instructions on the WIFI module into
Line configuration (after the completion of the configuration do not power, because the WIFI module after some of the parameters can not be saved)
Mobile phone and WIFI module to establish a network connection can use the mobile phone APP control relay.

Electronic Dice NE555 CD4017 DIY Kit 5mm Red LEDs 4.5-5V ICSK057A Electronic Fun Kit $2.19
Vendor: e_goto Processor store (IC Station) circuit

ICSK057A Precise Electronic Dice DIY Kit 7pcs 5mm Red LEDs
Electronic dice kit is based on the NE555 oscillator circuit and circuit CD4017 counter display kit.

1. Kit parameters:
Supply voltage: 4.5-5V
Dimensions: 74 * 35mm

2. Function:
When a power-up, 7 LED will randomly display a number of points, players press the switch S1,7 all lit LED only after about 7 seconds LED light starts blinking, until finally showed stable points. Throughout the end of the first “crap” process.

3. Circuit:
Circuit mainly by the pulse generator and a decade counter circuit. Pulse generator and external elements by NE555 multivibrator, when you press the button S1 when Q1 turns on, the output pulse NE555 3 feet, then five turns the output CD4017 output high, resistors and transistors by different combination, can drive seven LED light to indicate the number of points 1-6 points.

uxcell Waterproof Plastic Electric Project Case Junction Box (2.3×1.4-Inches, 5pcs) $8.07

Adafruit Raspberry Pi Zero Case $4.75

This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Zero safe and secure while also looking super sleek. You can use all of the connectors on the edges of the Pi: mini HDMI, microSD slot, microUSB power, and microUSB port. There’s also a cut out to allow a 2×20-pin header to be soldered onto the Pi Zero.

The enclosure was designed by Mike Doell – just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your pocket, bookbag, or toolbox. It has slim openings for all your cables, an easy-to-access slot for your Micro SD card, slots for your Pi Camera, and a space for your GPIO cable to extend out from the Pi.

The Pi sits nicely in the base, latching to the corner pegs, and the lid fits snugly on top. If you want to break-out your Pi you can simply snap off the GPIO slot and add pHATs, Bonnets, GPIO cables and other accessories with ease.

Raspberry Pi Zero W $10

If you didn’t think that the Raspberry Pi Zero could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero W offers all the benefits of the Pi Zero v1.3, but with one big difference – built-in WiFi!

More specifically, this giant upgrade is the addition of a BCM43143 WiFi chip BUILT-IN to your Raspberry Pi Zero – just like the Pi 3! No more pesky WiFi adapters – this Pi is WiFi ready. There’s also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution (BLE support is still in the works, software-wise).

I hope you enjoyed this video and if you liked it or my escapades then click on that LIKE button.

Any questions or feedback is greatly appreciated.

I have a companion blog where I preach technology.

Do a Geek a favor and subscribe to my YouTube channel. I would really appreciate it.

Now… go build something… remember measure twice

GMH 035 Postbag 4 Channel Remote control relay

High Quality 12V 3A 4CH 200M Wireless Remote Control Relay Switch Transceiver With 2 Receiver Compatible With 2262 2260 1527

It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and soon come true. The volume is small and the performance is stable and reliable, high receive sensitivity.

1.It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Extremely easy to set up and use.
4. Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone’s need of choosing the wireless remote control as they like to work with it.


GMH 025 Postbag Clap Relay Module, DIY VU Meter Kit, Buck Converter

GMH-025-Clap Relay, DIY VU Meter, Raspberry PI Case, Boost converters, Dupont Cables

Dupont line 120pcs 30cm male to male + male to female and female to female jumper wire Dupont cable for Arduino

Servo bracket PT Pan/Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV dedicated nylon PTZ for 9G SG90

LM3915 Audio Level Indicator DIY Kit Electronic Production Suite Good

5V Voice control switch suite DIY kits selling electronic circuit with high quality

Raspberry Pi Model B+ 3 B Black Case Cover Shell Enclosure Box Transparent double color Compatible LCD 3.2 inch/3.5 inch

DC-DC Adjustable Step-up boost Power Converter Module XL6009 Replace LM2577


GMH 023 Postbag Ting GSN SIM Card, 600MPS Wireless Dual Band dongle, Wii Teacher whiteboard pen VU LED Kit, more

GMH 023 Postbag Ting GSN SIM Card, 600MPS Wireless Dual Band dongle, Wii Teacher whiteboard pen VU LED Kit, more

DIY Kit Level Indicator Electronic Production Suite LM3915

Unit Type:piecePackage Weight:0.25kg (0.55lb.)Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

IMC Hot 10 Pairs 150mm JST Connector Plug Cable Male+Female for RC Battery

IMC Hot 10 Pcs CCTV Cameras 2.1mm x 5.5mm Female Male DC Power Plug Adapter

Ting GSM SIM card – Average monthly bill is $23. No contract, Universal SIM, Nationwide coverage, Only pay for what you use.

Anker Ultra Slim 4-Port USB 3.0 Data Hub with 12W Power Adapter / USB Wall Charger Included

4-Port USB 3.0 Data Hub with USB Wall Charger
The USB Hub and Wall Charger Combo It’s just 1cm thick and weighs about the same as a bar of soap.
Dual-Purpose Wall Charger
Included 5V/2.4A adapter can either plug into the hub to accelerate data transfers, or plug into your phone’s Micro-USB port to charge it directly.

ANEWISH 600Mbps Wireless USB Wifi Dongle Network Adapter, Dual Band 2.4G/5G with Antenna for Laptop Desktop Win XP/7/8/10, MAC OS X 10.6-10.9, Linux 2.3/2.6/4.3

Super Smooth IR Pen ™ – Wii Remote Whiteboard Pen – pressure switch infrared pen

Unfortunately, the WiiTeacher project has kinda been abandoned but, this will still be fun


GMH-015 Postbag Platic Box, NodeMCU HUZZAH feather board, TV-B-Gone Kit

Adafruit HUZZAH ESP8266 Breakout

Add the Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, it’s also been very difficult to use. Most of the low-cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!

Each module comes pre-loaded with NodeMCU’s Lua interpreter (NodeMCU 0.9.5 build 20150318 / Lua 5.1.4 to be specific), you can run commands, and ‘save’ Lua programs directly to the module’s Flash using a USB-Serial converter cable. But, if you’d like, you can skip Lua and go direct to using the Arduino IDE. Once you download the ESP8266 core, you can treat it just like a microcontroller+WiFi board, no other processors needed!
Adafruit TV BeGone TV-B-Gone Kit – Universal v1.2

When we were putting together the TV-B-Gone kit, we started imagining a dystopian future, filled with televisions, where this kit would be super useful and we’d be a hero for having one. And while maybe that’s dramatic, the TV-B-Gone is perfect for playing pranks on your friends during the Super Bowl or getting some peace and quiet during dinner.
Feather Stacking Headers – 12-pin and 16-pin female headers

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you’re in business!
What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well